Announcement
Collapse
No announcement yet.
carb dip available in australia?
Collapse
X
-
carb dip available in australia?
I have everything ready to rebuild my carbs.Can any member in australia tell me of an equivelant product to berrymans as I want to dip my carbs but cant seem to find anything other than carb cleaner in an aerosol can cheers.Tags: None
-
Originally posted by Hoosier Daddy View Postdeja-vue! There is another thread of this same nature going on by another Bloke in OZ...
http://www.thegsresources.com/_forum...d.php?t=173712
I did one originally after not being able to find anything from extensive searching too...
Yamalube carb cleaner is what you want.
Follow that thread, choose whether to boil or not going by the health warnings...1982 GS450E - The Wee Beastie
1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020
sigpic
450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh
Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11
Comment
-
sharpy
Originally posted by Hoosier Daddy View Postdeja-vue! There is another thread of this same nature going on by another Bloke in OZ...
http://www.thegsresources.com/_forum...d.php?t=173712
Comment
-
nahoo7
-
Originally posted by sharpy View PostAnd there almost neighbours by 80klms
And no stress nahoo7, good luck with it!1982 GS450E - The Wee Beastie
1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020
sigpic
450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh
Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11
Comment
-
Originally posted by sharpy View PostAnd there almost neighbours by 80klms
actually you are wrong! its just over 120km (124km my last trip)
Bundy to maryborough - Googlemaps
lolRegards,
Andy
Queensland Australia
http://i117.photobucket.com/albums/o...h_PIC00011.jpg
GS750B (1977)
Wiseco 850 kit, K&N pods, 4-1 transac, Custom 2 pak paint, IKON shocks, Custom L.E.D light boards (turn + stop/tail + dash)
Comment
-
oldgrumpy
great carby cleaner......
hi you could buy some yamaha carby cleaner and soak them ,,it works really well....... or you could get a plastic 5 gal drum for oil ..clean it out... remove the diaphrams.... and strip most of them put it all in the clean drum and cover them with 98% unleaded and for say 4-5 days ,,,,every day or so pull them out and blow them out then drop them back in flush them them around blow them out with a compressor and repeat.... it works regards david
Comment
Comment