Announcement

Collapse
No announcement yet.

80 gs850 Intake manifolds

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    80 gs850 Intake manifolds

    Hi, I have a 1980 GS850 with CV carbs. The factory manifolds are junk, kind of to be expected since I picked the bike up for cheap, but running (barely). My question is, does this manifold/boot cross with anything else, new ones are out of my reach at the moment due to financial reasons, and decent used ones on ebay are as rare as hen's teeth. Any help would be appreciated thanks.
    Tags: None
    #2
    Greetings and Salutations!!

    Hi Mr. 84GS850,

    Sorry, but the OEM Suzuki "intake pipes" are the only game in town. Any substitute will be only a temporary fix. I strongly encourage you to save up your mad money and do it right the first time. Have a look at the Air Intake Repair guide on my little website. You'll find lots of Gs850G goodness there.

    Anyway, let me dump a TON if information on you and share some GS lovin'.

    I just stopped by to welcome you to the forum in my own, special way.

    If there's anything you'd like to know about the Suzuki GS model bikes, and most others actually, you've come to the right place. There's a lot of knowledge and experience here in the community. Come on in and let me say "HOoooowwwDY!"....

    Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", "Top 15 Tips For GS Happiness", the Carb Rebuild Series, and the Stator Papers. All of these tasks must be addressed in order to have a safe, reliable machine. Now let me roll out the welcome mat for you...



    Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!

    Thanks for joining us. Keep us informed.

    Thank you for your indulgence,

    BassCliff

    Comment

      #3
      Well, crap....that's what I figured, but it never hurts to ask. Thank you for the welcome, and the info on your site, I read a large portion of it last night via my cell phone......might have gone through all of it, but the squinting to see it turned to fighting to keep eyes open, and soon gave way to sleep.

      Comment

        #4
        Hi,

        I suppose it's possible that someone mght have an old, but usable set laying around in their garage. Ask around ind the Parts Wanted section, check the Parts For Sale section.

        Thank you for your indulgence,

        BassCliff

        Comment

        Previous template Next
        Working...
        X