.png "Powered by vBulletin")
Hey all,
After rebuilding my carbs, I've found that my choke assembly is hanging open. Since I cleaned the choke slides (I think that's what they're called...the part that attaches to the actuator rod), I don't think any of them are sticking. I think it's the spring, which I can't find online but I can probably just find a similar spring at the hardware store. I did notice that a couple of the rubber caps on these parts were deteriorating (and no, I didn't put them in the carb dip). Could that be an issue down the road? Do these actually seal anything?
Thanks for your help.
After rebuilding my carbs, I've found that my choke assembly is hanging open. Since I cleaned the choke slides (I think that's what they're called...the part that attaches to the actuator rod), I don't think any of them are sticking. I think it's the spring, which I can't find online but I can probably just find a similar spring at the hardware store. I did notice that a couple of the rubber caps on these parts were deteriorating (and no, I didn't put them in the carb dip). Could that be an issue down the road? Do these actually seal anything?
Thanks for your help.