choke

[Guest]

ware can i get the choke seals>>> i did a carb rebuild and now i cant find these seals>>> or do they normaly need replaced>>>>

[Steve]

I have never had to replace one, but I have never dipped them.

You didn't dip them, did you?

.

[sk843143]

no i didnt dip them ..... but they just dont look like they would seal verry well..... also whare can i get some float bowl drain bolts that are drilled so i can verrify float height settings>>> (i dont have a drill press to do it my self. i did serch but came up empty)

[Suzuki_Don]

no i didnt dip them ..... but they just dont look like they would seal verry well..... also whare can i get some float bowl drain bolts that are drilled so i can verrify float height settings>>> (i dont have a drill press to do it my self. i did serch but came up empty)

You drill them yourself. You don't need a drill press. I just clamped mine in a vice by the hex head and drilled through with a hand drill. I then drilled a slightly larger hole inside the small hole and inserted a short length os steel tube and soldered it in place.

I must say though I have never used it. I set the float levels when the carbs were dipped and cleaned and the bike has run fine ever since, so I have never had to check the float levels.

[sk843143]

do you still have the ones that u drilled.... if so would u b intrasted in selling them..... i dont have any extra bolts to drill and bike boneyards are few and far between around here..... thanx for all the info i realy app it