Announcement

Collapse
No announcement yet.

mechanics book time

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    mechanics book time

    I have a 1983 gs 750E. Does anyone know the book time for a mechanic to remove and overhaul carbs and reinstall ?
    Old age and treachery will beat youth and skill every time1983 GS 750
    https://c1.staticflickr.com/5/4256/3...8bf549ee_t.jpghttps://c1.staticflickr.com/5/4196/3...cab9f62d_t.jpg

    #2
    IF they would even take on the job, you would be looking at $4-500 dollars.

    There are several members here that offer a similar service for less than half the price.

    You can do it yourself for FAR less than that.

    Where are you, one of us is likely rather close.

    .
    sigpic
    mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
    hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
    #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
    #2 son: 1980 GS1000G
    Family Portrait
    Siblings and Spouses
    Mom's first ride
    Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
    (Click on my username in the upper-left corner for e-mail info.)

    Comment


      #3
      I have one too and while not a pro I can be fairly quick but yet thorough so I'd say 3 to 4 hours (not counting soak time of course).

      I will be off to see my pro wrench buddy later to day so I will query him and let you know what he would charge.

      Are you getting some weird estimates?

      Good luck with it.
      Spyug

      Comment


        #4
        Thanx Guys
        I live in Vancouver BC. I am the first owner of this bike, and have less than 10000 km on it. My interest in cycling has been renewed and have just pulled it out of retirement after 12 years. The bike still had 12 year old gas in it, but fired up right away. I live in an apartment so I don' really have facilities to work on it. Like draining oil and gas and disposing of it. So I through some Seafoam into it topped up the gas, but it bogs to about 3800 rpm and then damn near tears my arms out when all 4 cylinders engage. I suspect the jets are clogged and or varnished. My reason for asking about book time is this. A few days ago I took it into my local shop for an oil and filter change. For which I was quoted $20 plus parts. As I wanted to go for a ride after I also asked him to throw knew plugs in, change the front headlight bulb, adjust and oil the chain. For which I fully expected to pay mechanics rate for. I did not expect to pay for the mechanic to search for parts. 2 hours total labor. As I observed him heading for the parts department several times. I am now leery of hiring them to do the carb job without a firm commitment to the labour involved. I like this shop as their product prices are very good. Just ordered 2 new tires from them to replace the 28 year old rubber on them. Any advice ?
        Old age and treachery will beat youth and skill every time1983 GS 750
        https://c1.staticflickr.com/5/4256/3...8bf549ee_t.jpghttps://c1.staticflickr.com/5/4196/3...cab9f62d_t.jpg

        Comment


          #5
          Wow, 2 hours to look at a spark plug and a bulb?

          Why would you go back there?

          You're getting hosed
          1978 GS 1000 (since new)
          1979 GS 1000 (The Fridge, superbike replica project)
          1978 GS 1000 (parts)
          1981 GS 850 (anyone want a project?)
          1981 GPZ 550 (backroad screamer)
          1970 450 Mk IIID (THUMP!)
          2007 DRz 400S
          1999 ATK 490ES
          1994 DR 350SES

          Comment


            #6
            Yes. Unless your pockets are deep, learn how to service your own bike or get a much newer one. The harsh reality of a GS is that they don't know how to work on them, don't want to work on them, and it costs a bundle to have them do the work which may, or may not, be done correctly.
            There are plenty of folk here that can advise you on procedures. For example, look at this site: http://members.dslextreme.com/users/bikecliff/
            Scroll down the right side. Just below Other Contributors there is the link called CV Carburetor Rebuild Guide. Download it and read through it.
            You can do your own carbs for about $20-25 (USA) and the cost of a can of carb dip $20 (USA).
            I have never done it before, but my GPz is now running on a set I rebuilt. It took time, but the satisfaction of a job well done is priceless.
            Best of luck.

            Comment


              #7
              Ya I know what you mean. Unfortunately they are the only Suzuki shop in the city, without heading to the suburbs. But they do have their good points ie product prices. I am just looking for a fair number of labor hours that both the shop owner and I will be satisfied. With NO SURPRISES !
              Old age and treachery will beat youth and skill every time1983 GS 750
              https://c1.staticflickr.com/5/4256/3...8bf549ee_t.jpghttps://c1.staticflickr.com/5/4196/3...cab9f62d_t.jpg

              Comment


                #8
                Time spent on the work order is billable time. Does not matter if it is spinning wrenches or walking to the back for parts.

                Now, if he had to order something, waiting a few days for the part to come in is not billable, but opening the package, then installing it certainly is.

                Actually, you should consider yourself very fortunate that they are even letting the bike in the door. Many shops have a "10-year" rule. Anything older than 10 years is not allowed in the door. Too many things break, due to lack of mainenance, which adds to the actual time on the job, taking them over the flat-rate billable time.

                It won't hurt to ask how much they would charge, but also get a detailed list of what will be done and the parts involved. Too many times, even "professional" mechanics will drop the float bowls, spritz some carb spray around, put some new gaskets in there and call it an "overhaul".

                An "overhaul" should involve complete dismantling, soaking the carb bodies and the brass jets in cleaner (probably overnight, in your case), then re-assembly with new o-rings and gaskets.

                .
                sigpic
                mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
                hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
                #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
                #2 son: 1980 GS1000G
                Family Portrait
                Siblings and Spouses
                Mom's first ride
                Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
                (Click on my username in the upper-left corner for e-mail info.)

                Comment


                  #9
                  Originally posted by bccap View Post
                  Thanx Guys
                  I live in Vancouver BC. I am the first owner of this bike, and have less than 10000 km on it. My interest in cycling has been renewed and have just pulled it out of retirement after 12 years. The bike still had 12 year old gas in it, but fired up right away. I live in an apartment so I don' really have facilities to work on it. Like draining oil and gas and disposing of it. So I through some Seafoam into it topped up the gas, but it bogs to about 3800 rpm and then damn near tears my arms out when all 4 cylinders engage. I suspect the jets are clogged and or varnished. My reason for asking about book time is this. A few days ago I took it into my local shop for an oil and filter change. For which I was quoted $20 plus parts. As I wanted to go for a ride after I also asked him to throw knew plugs in, change the front headlight bulb, adjust and oil the chain. For which I fully expected to pay mechanics rate for. I did not expect to pay for the mechanic to search for parts. 2 hours total labor. As I observed him heading for the parts department several times. I am now leery of hiring them to do the carb job without a firm commitment to the labour involved. I like this shop as their product prices are very good. Just ordered 2 new tires from them to replace the 28 year old rubber on them. Any advice ?

                  There are a few Vancouerites on the forum. Some are preety hard core when it comes to builds so maybe one could be of assistance.

                  If it runs like a bat out of hell above 3800 I would run more seafoam and hope for the best, After you replace your deathtrap tires.

                  Comment


                    #10
                    Steve
                    As I said before I have no problem with paying for work performed. But going upstairs to look for parts in a darkened room {roughly 10 min. shot } while the parts guy and owner are sitting in a cafe across the road, I do not consider professional. Especially when there is a customer spending money on everything from helmets, clothes, tires etc. As the oil change was 20 bucks. Do you consider 2 hours labor reasonable for the work I had done. If I owned the business I might have told the customer not to bother with the chain as I had just informed he needed new tires and was about to purchase them here. { the chain was not that loose as I had inspected it a few days ago }
                    Old age and treachery will beat youth and skill every time1983 GS 750
                    https://c1.staticflickr.com/5/4256/3...8bf549ee_t.jpghttps://c1.staticflickr.com/5/4196/3...cab9f62d_t.jpg

                    Comment


                      #11
                      Do the work yourself or buy a newer bike. Taking this dinosaur to a shop cannot end well. Just a few hours shop time is more than the bike is worth.
                      The normal plan is to ruin the bike and then sell you a new one.
                      There are a lot of GSR members who would love to take that old bike off your hands and give it a good home.
                      http://img.photobucket.com/albums/v5...tatesMap-1.jpg

                      Life is too short to ride an L.

                      Comment


                        #12
                        I like my " dinosaur ". But I guess I might bite the bullet and do the work myself. This site is excellent and offers much help when people develop problems. I did look at new bikes but didn't honestly like them. The 750's I saw seemed a bit over the top. Wide fairings and when I sat on them I felt I was inside them rather than on top of them. Maybe I'm just a bit old fashioned.
                        Old age and treachery will beat youth and skill every time1983 GS 750
                        https://c1.staticflickr.com/5/4256/3...8bf549ee_t.jpghttps://c1.staticflickr.com/5/4196/3...cab9f62d_t.jpg

                        Comment


                          #13
                          The problem with working on these old bikes is that nuts and bolts, for example, can get bloody difficult to undo. I've spent several hours for example trying to remove a swinging arm pivot bolt (should take about a minute if it wasn't rusted in). Plus most of the mechanics now working in shops just don't know what they're looking at when faced by a bike older than their dad.

                          As tkent says, taking these old bikes to a shop isn't fair on them or you unless you trust them 100%.
                          79 GS1000S
                          79 GS1000S (another one)
                          80 GSX750
                          80 GS550
                          80 CB650 cafe racer
                          75 PC50 - the one with OHV and pedals...
                          75 TS100 - being ridden (suicidally) by my father

                          Comment


                            #14
                            Greetings and Salutations!!

                            Hi Mr. bccap,

                            If I can work on my 30 year old motorcycle, anybody can. Really!

                            Anyway, let me dump a TON if information on you and let you in on some GS lovin'.

                            I just stopped by to welcome you to the forum in my own, special way.

                            If there's anything you'd like to know about the Suzuki GS model bikes, and most others actually, you've come to the right place. There's a lot of knowledge and experience here in the community. Come on in and let me say "HOoooowwwDY!"....

                            Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", "Top 15 Tips For GS Happiness", the Carb Rebuild Series, and the Stator Papers. All of these tasks must be addressed in order to have a safe, reliable machine. Now let me roll out the welcome mat for you...



                            Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!

                            Thanks for joining us. Keep us informed.

                            Thank you for your indulgence,

                            BassCliff

                            Comment


                              #15
                              Originally posted by Steve View Post
                              Time spent on the work order is billable time. Does not matter if it is spinning wrenches or walking to the back for parts.

                              Now, if he had to order something, waiting a few days for the part to come in is not billable, but opening the package, then installing it certainly is.
                              Back when I worked in a dealership we charged Flat Rate for labor, and the mechanics were paid on commission, if it took longer than the Flat Rate book called for it was out of my pocket, if I could do the job in less time it was to my advantage. And yes, the trip to the parts counter and the test ride were on my dime, not the customers. It meant having to hustle to be able to bill 8 hours in an 8 hour day, but it can be done. I did not have to go digging around for parts however, thats what teh parts guy is for.

                              Comment

                              Working...
                              X