Announcement

Collapse
No announcement yet.

carb rebuild kit 79 gs750

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    carb rebuild kit 79 gs750

    Anyone know a place to get a carb rebuild kit for a '79 gs750 that has all the right parts? or should i just buy them seperately? any how i see alot of places to buy them but if i am going to spend the dough i wanna be sure i'm getting what i'm paying for.

    #2
    You need orings from http://www.cycleorings.com/. Remember the important intake oring also.
    Inspect and clean all the small parts, jets and needles and reuse them. Then you just need new gaskets.

    Comment


      #3
      If you need new bowl gaskets then see Z1 Enterprises
      Cowboy Up or Quit. - Run Free Lou and Rest in Peace

      1981 GS550T - My First
      1981 GS550L - My Eldest Daughter's - Now Sold
      2007 GSF1250SA Bandit - My touring bike

      Sit tall in the saddle Hold your head up high
      Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
      and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"

      Comment


        #4
        Unless you have broken the tips off the pilot screws (air or fuel), you do not even want to consider getting one of those junk kits.

        Too often, the quality of the parts in the kits is so bad, installing the kit will make your bike run worse.

        You only need to clean the good parts that you have, replace the individual parts that might be damaged and replace the o-rings with a complete kit from cycleorings.com. The carb o-rings, the intake o-rings and the stainless hardware to hold the tubes back on will cost you less than one carb kit (and you need four kits).

        .
        sigpic
        mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
        hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
        #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
        #2 son: 1980 GS1000G
        Family Portrait
        Siblings and Spouses
        Mom's first ride
        Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
        (Click on my username in the upper-left corner for e-mail info.)

        Comment

        Working...
        X