Announcement

Collapse
No announcement yet.

Must be the needle and seat

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Must be the needle and seat

    I got the electrical system all done and good...so much better after the coil relay mod.


    The pickup coils were bad, verified, and changed.

    The petcock is no longer working, and the one I ordered didnt get ordered, so now, third time, I am ordering it.

    I got gas flowing to the carbs, nonetheless, and now I have a problem with the right side carb (siamese) on my 85 GS550 E. I pulled the plugs, they are wet, so I know its dumping fuel in the cylinder.

    How much are aftermarket or OEM needle and seat sets?

    Gonna change petcock and needle and seats then change oil before I try starting it.

    thanks in advance.

    #2
    adjust the float height as per the manual.
    See what happens.

    Comment


      #3
      Hi,

      How much are aftermarket or OEM needle and seat sets?
      # 49 - VALVE ASSY, NEEDLE part# 13370-48B00 (replaces 13370-43410) is $40.87 at Partshark.com. You won't find them much cheaper. For this application, OEM always works best.




      Thank you for your indulgence,

      BassCliff

      Comment

      Working...
      X