Announcement

Collapse
No announcement yet.

petcock or not!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    petcock or not!

    my no 2" plug is fouling so i read its proberly the petcock diaphram

    with petrol running back down the vacum airline ,if thats the case rather then replacing the petcock can i not put a non return valve on the line rather then buying a NEW petcock!

    #2
    Hi,

    I think the vacuum petcock is one of the greatest things since sliced bread. But some here have done away with them and installed a generic Pingel petcock. You may or may not require an adapter plate. You will have to cap the vacuum port on the carb. And you will ALWAYS have to remember to turn off the gas when you stop the engine.

    And before you ask, see z1enterprises.com for your Pingel.

    Thank you for your indulgence,

    BassCliff

    Comment


      #3
      I suggest testing the petcock before assuming too much. Clear tubing for the vacuum line will tell the story.
      Ed

      To measure is to know.

      Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

      Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

      Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

      KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

      Comment

      Working...
      X