Announcement

Collapse
No announcement yet.

new to the forum, need some carb help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    new to the forum, need some carb help

    Hello!

    I recently grabbed an 82 GS1100EZ. It didn't come with carbs so I bought some junked carbs and I'm currently cleaning them, rejetting, and fitting them with individual filters... BUT since the bike didn't come with carbs, there were obviously no fuel or vacuum lines in place. I looked through the service manual on basscliff's site and I still can't figure out where the vacuum line from the fuel tank goes, or what i'm supposed to do with those two nozzles in between carbs 1+2 and 3+4. I assume those are also vacuum lines. Can anyone direct me to a diagram or just tell me what to do? I can post pictures tonight after work if this post doesn't make any sense.

    Thanks,

    Sami

    #2
    Hope this helps
    Old age and treachery will beat youth and skill every time1983 GS 750
    https://c1.staticflickr.com/5/4256/3...8bf549ee_t.jpghttps://c1.staticflickr.com/5/4196/3...cab9f62d_t.jpg

    Comment


      #3
      the ones between 1+2 and 3+4 are vent pipes, leave them as they are if you are running with pods. the vaccum line to the petcock is just left of No.3 carb
      1978 GS1085.

      Just remember, an opinion without 3.14 is just an onion!

      Comment


        #4
        Thanks guys, that is EXACTLY what I needed to know!

        Comment

        Working...
        X