Any ideas on how to get them to swell again to normal size so that they'll stay put?
Announcement
Collapse
No announcement yet.
shrunken pilot jet plugs after carb rebuild
Collapse
X
-
shrunken pilot jet plugs after carb rebuild
my pilot jet plugs on the BS34SS carbs on the 1100G have shrunk up during the course of the time its taken me to complete the carb rebuild. When I install the pilot jet plugs back into the hole they won't stay seated due to shrinkage.
Any ideas on how to get them to swell again to normal size so that they'll stay put?Tags: None
-
Either get new ones or just put them back in.
The bowl has a projection that will hold the plugs in place, but new plugs are cheap.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
-
TheCafeKid
Or soak em in gas, then put them back in. They'll swell back up a little. Get all swolled and stuff.
Comment
Comment