GS850 intake boots

[Anthony]

Hi I am looking for some new intake boots for a GS850 , the ones from airfilter to carb , any suggestions of where to buy. thks

[BassCliff]

Hi Mr. Anthony,

Z1Enterprises.com has a good price on a set. I happened to get mine from partshark.com. (Don't forget the O-rings too.) But in your "mega-welcome" is a long list of our favorite vendors for OEM parts, aftermarket accessories, and miscellaneous tidbits. You also might want to take a look at this PDF file: Air Intake Repair

To get you started, let me point you in the right direction, dump a TON if information on you, and share some GS850G lovin'.

I just stopped by to welcome you to the forum in my own, special way.

If there's anything you'd like to know about the Suzuki GS model bikes, and most others actually, you've come to the right place. There's a lot of knowledge and experience here in the community. Come on in and let me say "HOoooowwwDY!"....

Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", "Top 15 Tips For GS Happiness", the Carb Cleanup Series, and the Stator Papers. All of these tasks must be addressed in order to have a safe, reliable machine. Now let me roll out the welcome mat for you...



Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!

Thanks for joining us. Keep us informed.

Thank you for your indulgence,

BassCliff

[Anthony]

Thanks the info.
I have ordered a set of boots from Z1 - there are LH and RH
is there a top and bottom of the boot when fitting .why are they different.?

[Steve]

Yes, there is a top and bottom. There is a bit of an angle because the holes in the airbox are evenly spaced and the carbs aren't.

I think BassCliff mis-understood which boots you were asking about, though. The ones from the airbox to the carbs do not have o-rings.

.

[BassCliff]

Hi,

Oops, thanks Steve. I did misread the request. Thanks for the clarification.

Mr. Anthony, make sure you have ordered the airbox boots and not the carb intake boots.


Thank you for your indulgence,

BassCliff