Announcement

Collapse
No announcement yet.

carb securing mount?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    carb securing mount?

    ok after a rather hard landing from a very irresponsible mono wheel, the carbs popped out of the rubbers.luckily i had my multi tool with a screwdriver so i could refit them.
    i have researched a bit and apparantly some drag racers use a bracket/stay that bolts to the carbs and engine somewhere to prevent this happening.
    are these available to buy or is it a case of measuring and fabricating something?
    (belmouths fitted so no air box to support them)
    1978 GS1085.

    Just remember, an opinion without 3.14 is just an onion!
Working...
X