Announcement

Collapse
No announcement yet.

GS1100G petcock diaphragm

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    GS1100G petcock diaphragm

    Just stripped and cleaned out the petcock there as the lever was seized. Reassembled and it appears to be working ok, but the diaphragm didn't look to be in great shape.
    Can it be got as a separate part or do ya have to buy a complete petcock?

    #2
    Hi,

    Petcock rebuild kits are very common. Check with your favorite local or online vendor. CLICK HERE for a list of vendors. I'm not sure if Z1Enterprises.com will ship internationally, but I would start there.


    Thank you for your indulgence,

    BassCliff

    Comment


      #3
      They make rebuilds which do have new diaphragms.
      May want to just get a new fuel tap.
      1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
      1985 GS1150ES stock with 85 Red E bodywork.

      Comment


        #4
        Picked up a cheap kit on ebay and fitted it. All good.

        Comment


          #5
          Originally posted by Guy View Post
          Picked up a cheap kit on ebay and fitted it. All good.
          Consider yourself among the 10% elite.

          Yep, that's the approximate success rate with the rebuild kits.

          .
          sigpic
          mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
          hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
          #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
          #2 son: 1980 GS1000G
          Family Portrait
          Siblings and Spouses
          Mom's first ride
          Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
          (Click on my username in the upper-left corner for e-mail info.)

          Comment


            #6
            Hope it lasts so......

            Comment

            Working...
            X