.png "Powered by vBulletin")
I have a 83 gs650. I cleaned the carbs now can't figure out how to place the throttle and choke cables. Any pics would be greatly appreciated.
-
-
Hello, and welcome to the forums.
While we wait for you to receive a proper welcome I thought I would chime in.
Although I am not an expert on your or any other particular model I would reccomend taking a look through the service manual for your bike.
I saw a copy on Basscliff's website which contains about a million useful links and thought I would share it with you while you wait on more informed responses.
Bikecliff's site is located at http://members.dslextreme.com/users/bikecliff/
and the manual I was referring to is http://www.mtsac.edu/~cliff/storage/gs/GS650GManual.pdf
on page 140 there is a diagram of the carb setup and item 16 is the throttle lever.
I would also take a look at the carb rebuild instructions by Mr. Nessism (also on Basscliff's site) to make sure you haven't skipped any steps like I did during my first rebuild.
I hope this helps. -
Oh and make sure you install the throttle cable BEFORE putting on the carbs.
You will thank me later!1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
Comment