Announcement

Collapse
No announcement yet.

will these carbs fit my bike

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    will these carbs fit my bike

    still working on my 1980 gs1000g trying to find a decent set of afforable carbs do carbs from early 80s kz1000s fit my bike?

    below are the carbs im looking at,i know the chokes different but no biggie just wanna be sure the carbs will match up with the intake boots and all

    #2
    Don't know if they will fit, but what's wrong with the carbs you have?

    .
    sigpic
    mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
    hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
    #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
    #2 son: 1980 GS1000G
    Family Portrait
    Siblings and Spouses
    Mom's first ride
    Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
    (Click on my username in the upper-left corner for e-mail info.)

    Comment


      #3
      broke the body taking um apart lol

      Comment


        #4
        Hi,

        I'll bet one of the members has a spare carb body for you. Post in the "Parts Wanted" section. It's hard to say if the Kaw carb rack will have the same spacing. Are they BS34SS carbs? One of those bodies might fit on the Suzuki carb rack, but I have no first hand knowledge.


        Thank you for your indulgence,

        BassCliff

        Comment


          #5
          found a set off a 1100 gs guy says there bs34 carbs so size wise they should fit right?

          Comment


            #6
            Hi,

            Not only do the carb throats have to fit, the the rack spacing has to fit too (how far apart the carbs are from each other).


            Thank you for your indulgence,

            BassCliff

            Comment


              #7
              Does the gang plate (or whatever it is called) clear your cam chain tensioner?
              Is the idle screw mounted on the bottom?
              I made a set fit but it was NOT easy.




              Daniel

              Comment

              Working...
              X