.png "Powered by vBulletin")
Anyone can help me regarding the sizes of carburetor mounting flange for Suzuki GS550\1980. I need to replace them because of air leaking.
Thanks
Thanks
-
-
Cant help directly, but I know bikebandit has a bunch of different "universal" flanges for mikuni's. Just got a set of the "bikers choice" for my '77 gs400.
you should get a caliper and measure the bolt spacing and the throat diameter. One of these will probably fit:
-
Are you refering to the o-rings that sit between the flange and cylinder head- visit www.cycleorings.com for those? or the carb boots themselves?Originally posted by DUSIEK View Post1981 gs650L
"We are all born ignorant, but you have to work hard to stay stupid" Ben FranklinComment
-
Carburetor mounting flange for Suzuki GS550\1980
I'm referring to carburetor mounting flange. Original they are metal-rubber parts with o-ring. The problem is mine are mounted on the bike, so I have no way to make a measurements right now. They sell a lot of different sizes rubber made only. I do not know what size to order until I have correct measurement .
ThanksComment
-
Did you look thru Mr. Basscliff's welcome wagon for vendors ? As I recall, these carb boots are about $20 each; you have to make sure the vacuum/sync ports face out when installed. The orings can be got thru cycleorings- a member on this site.1981 gs650L
"We are all born ignorant, but you have to work hard to stay stupid" Ben FranklinComment
-
Just order them from your friendly Suzuki dealer or Z1 and quote the part numbers required.Comment
Comment