I dont know what to try next. Anyone have this issue before?
Announcement
Collapse
No announcement yet.
Carb cleaning problems
Collapse
X
-
Carb cleaning problems
I am trying to clean a set of gsxr carbs. I have soaked them in my usual stuff, Gunk hydroseal. The metal and brass parts are coming out nice, but the carb bodies end up with a white powdery stuff on them after drying. The powdery stuff comes off on your finger when you wipe them.
I dont know what to try next. Anyone have this issue before?Tags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35604
- Torrance, CA
Maybe scrub down the carb with a tooth brush and dish soap after the dip rinse process? Spray with WD-40 after that?Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Billy Ricks
A little aluminum polish thinned down with some mineral spirits so it's not so pasty will work. Use Q-tips and small artists brushes to get down in the crevices. The soft metal the carbs are made out of polish up almost like chrome. Once you get started you'll get carried away.
Comment
-
AJ
Comment
Comment