petcock prime screw o-rings

[86FieroSE]

That explains the erstwhile inexplicable hole spot in mine.
The gasket has to be one of the thin resinated fibre types.
Can you size it for Fier0 dude?

TYVM Jeeps but I need the o-rings that are on the primer screw not the fiber, ( or paper ) screw gasket. Just a reminder its the two lil o-rings near the end of the primer screw. Lol Fiero dude? Nice. I happend to like that nickname...

[pete]

Aaargh sorry mate! Completely forgot to look today as I ended up doing a big clean up after painting and some other stuff.

I shall do my best to remember tomorrow night, sorry if that's a bit slow... I have a memory like a sieve unfortunately...

Can't guarantee what shape the O rings are in or anything although I do know that it hasn't been through carb cleaner as I didn't bother after realising the metal plate in there was in a few different pieces....

[86FieroSE]

Aaargh sorry mate! Completely forgot to look today as I ended up doing a big clean up after painting and some other stuff.

I shall do my best to remember tomorrow night, sorry if that's a bit slow... I have a memory like a sieve unfortunately...

Can't guarantee what shape the O rings are in or anything although I do know that it hasn't been through carb cleaner as I didn't bother after realising the metal plate in there was in a few different pieces....

No need to worry, winter is knocking on our door here in the very very north east. There will be 6 feet of snow on everything pretty soon.

Odd the metal plate in our stock petcock was busted too. The one thats in the vacuum diaphram part? Ours has a crack in it.

TYVM for any and all of your time and help!

Edit; plus I'm in the middle of this...www.fiero.nl/forum/Forum2/HTML/118944.html checkout this link I ya like, pretty cool stuff.

[pete]

No need to worry, winter is knocking on our door here in the very very north east. There will be 6 feet of snow on everything pretty soon.

Odd the metal plate in our stock petcock was busted too. The one thats in the vacuum diaphram part? Ours has a crack in it.

TYVM for any and all of your time and help!

Edit; plus I'm in the middle of this...www.fiero.nl/forum/Forum2/HTML/118944.html checkout this link I ya like, pretty cool stuff.

Cool, well, literally cool with the snow!

Yes that's the same piece that failed in mine, I'm guessing it's a weak point in these...

[pete]

Hey mate, here's my old screw:



Happy to send it just for the price of postage, but the O rings look a bit hard to me so I wasn't game enough to try to take them off to measure.