Carb rebuild Kits

[mike10]

I was wondering what is the best carb rebuild kit for my 1980 GS1000. Parts N More kits jump from 1978 to 1981. No 1980, I e-mailed them and the kit they said would work had a float bowl valve and a gasket. I wouldn't call it a rebuild kit. What do you guys and (Gals) use?

[GateKeeper]

This is what your looking for - http://www.cycleorings.com/

you should have gotten this as well

http://members.dslextreme.com/users/bikecliff/

http://members.dslextreme.com/users/bikecliff/images/GSR_Greeting.html

.

[BassCliff]

Hi,

Yes, all you need is an O-ring kit from http://cycleorings.com, some new float bowl gaskets, and the Mikuni BS(CV) Carburetor Rebuild Tutorial.

Thank you for your indulgence,

BassCliff

[mike10]

I used that stuff

When I rebuilt the carbs I run now. I think I might have some parts worn or missing with these. Thanks

[keman]

Most of the internal parts do not wear, they just get dirty and crusty with gas varnish and need to be cleaned well... I just did mine, (31 years old) and only needed the bowl gaskets and o-rings.

... Bowl gaskets >> http://www.z1enterprises.com/Carb-Fl...Yamaha-47.aspx $14.30 for all four...
... O-rings>>> http://www.cycleorings.com/ $14.73 for a complete set....
Get a gallon of carb dip, and follow the steps on this >>> http://www.mtsac.edu/~cliff/storage/...d_Tutorial.pdf

Save yourself a ton of cash...