Announcement

Collapse
No announcement yet.

Help Identifying Carb Parts That The PO Left Me

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Help Identifying Carb Parts That The PO Left Me

    I pulled the carbs to take a peek inside and see if they need to be rebuilt. However its starting to look like it has already been done. When I bought the bike I was given a box of random stuff and this was in it. What is all of it?



    Looks like most of the O-Rings however only a couple are missing. Maybe the PO only replaced some of the things in the carb? Whats the brass thing in the rubber boot?



    Looks like the dirty ones are the main jets?



    there are a few of these that all look the same but there are different part numbers for these. Also both set of these are taller than the ones that look the same that are with the larger group of parts



    old parts? Im guessing this is all the stuff that the PO replaced with some of this new stuff?



    New hardware which is currently on the carbs. Another reason why I think someone has already rebuilt them



    and something else



    thanks for any information!

    #2
    This rebuild tutorial should help... http://www.mtsac.edu/~cliff/storage/...d_Tutorial.pdf
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment

    Working...
    X