.png "Powered by vBulletin")
hi i have a 1980 gs1000 chain drive can anybody tell me which intake manifolds i should order?mine have no part number.thanx
-
-
If she's a genuine 80 and not a late registered 79 (so she should have CV carbs) the intakes you want are part no: 13110-49010.
Good time to replace the O rings as well.79 GS1000S
79 GS1000S (another one)
80 GSX750
80 GS550
80 CB650 cafe racer
75 PC50 - the one with OHV and pedals...
75 TS100 - being ridden (suicidally) by my father -
mine have rectangular topsComment
-
3 screws or 4 screws?Originally posted by baz View Post79 GS1000S
79 GS1000S (another one)
80 GSX750
80 GS550
80 CB650 cafe racer
75 PC50 - the one with OHV and pedals...
75 TS100 - being ridden (suicidally) by my fatherComment
-
3screws m8Comment
-
You have VM carbs and she's a 79 model - unless somebody has put big VMs on there. Check for that is the big nut on the underside of the float bowl.
Intakes for VM26s / 28s (the standard carbs) are part number 13110-4501079 GS1000S
79 GS1000S (another one)
80 GSX750
80 GS550
80 CB650 cafe racer
75 PC50 - the one with OHV and pedals...
75 TS100 - being ridden (suicidally) by my fatherComment
-
they are large round brass bolts if that makes sense?(drain plugs is what i mean) can you tell me where i can buy them .cheersComment
-
Whereabouts are you?Originally posted by baz View Post79 GS1000S
79 GS1000S (another one)
80 GSX750
80 GS550
80 CB650 cafe racer
75 PC50 - the one with OHV and pedals...
75 TS100 - being ridden (suicidally) by my fatherComment
-
im in south shields nr newcastleComment
-
Robinsons - £22.92 each and superceded part number 13110-49000. They have come down in price - and bit more than the gas and electric has today!
(if you fill in your location you won't get the Yanks telling you to buy from Bike Bandit etc....)79 GS1000S
79 GS1000S (another one)
80 GSX750
80 GS550
80 CB650 cafe racer
75 PC50 - the one with OHV and pedals...
75 TS100 - being ridden (suicidally) by my fatherComment
-
cheers m8 will take a look thanks a lot very helpful.BAZ.Comment
-
Don't worry about that, most of us would not wish that on our worst enemies.Originally posted by hampshirehog View Post
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
hi HD i could also do with some help wiring my bike if you are any good with electrics ,do you know if i can simplify the harness to get a neater finish .i got the bike in boxes originally so im not even sure that the loom ive got is the right one although i have it running, lights and indicators need sorting. the flasher control box looks like its been to visit the titanic so i will need to sort an alternative flasher setup .any advice would be much appreciated.BAZ.Comment
Comment