Announcement
Collapse
No announcement yet.
California Carbs 1984 GS550EF
Collapse
X
-
dulcimerbob
California Carbs 1984 GS550EF
I am trying to get some info on my carbs There are four ports on these carbs that look like vacuum ports. Hoses are attached and run to a tee fitting with one outlet back to a cannister under the seat fairing in behind the tailight. I have removed these hoses and capped the ports. I have now a fuel line, vacuum line an two vent hoses . Does this sound right ? I downloaded an 83GS550e manual and it does not cover a Ca setup . Help please.Tags: None
-
obsidianghost
I used the parts diagram(CA carbs page) from a dealer parts search, like boulovard suzuki. I printed the page and added it to my manual.
Comment
-
BassCliff
Hi,
Your carbs have a breather system, which you have disabled. I've never worked on the siamese carbs so all I can do is reference the available material. Forgive the large pictures but perhaps they will give you the detail you need.
From the manual:
From the parts fiche:
I hope this helps. Perhaps someone with a later 550 can confirm whether or not you have 2 fuel and 2 vacuum hoses that are T'd into the petcock.
Thank you for your indulgence,
BassCliffLast edited by Guest; 02-01-2012, 08:06 PM.
Comment
-
dulcimerbob
Thanks for the help. I capped the Ca stuff. Kept the breather hoses, and petcock, vacuum and fuel . Had pair of plug wires crossed now it starts and runs. Always look for the simple stuff , I never learn this for some reason
Comment
-
Johncdn
Cal carb
I bought one of these carbs for a Canadian bike and will be using it this spring. My question is though, if you block these off are you not disturbing an air circuit that is open during operation. Are these tank vapors taken into account during design and jet sizes based on this . Do you need to rejet to avoid a lean condition? Ideas,thoughts and comments please
Comment
-
JEEPRUSTY
Comment
-
dulcimerbob
The bike seems to run pretty good with all the smog stuff plugged and yes there is a canister under the rear seat cowl where the tool pouch is
Comment
-
JEEPRUSTY
Comment