Announcement
Collapse
No announcement yet.
81 GS 450 L carb kit/pricing?
Collapse
X
-
boston
81 GS 450 L carb kit/pricing?
After searching about online and not finding a single complete carb kit purchasing option for an 81 450 L, I went into a local shop to see if they knew of where to purchase one. Unfortunately it seems there's not as much demand for a full kit, but I'm still looking at trying to find the least expensive or at least "the most reasonable" price for a carb kit. Suggestions? I figure online I can be the store pricing of over 150 dollars... ha.Tags: None
-
koolaid_kid
You don't need a kit. You need a set of o-rings from cycleorings.com and new fuel bowl gaskets. And if your bike has o-rings on the carb instake boots, cycleorings carry those as well.
And the rebuild instructions from BassCliff's site.
-
keman
X2... no kit needed. Follow the Carb cleaning tutorial on the page linked in my sig. Get all your o rings from cycle orings (also linked on the page in my sig) do not take shortcuts, they will only make your task harder and cost more in the long run.
While you are at it replace the orings between the intake boots and the head. These are a MAJOR source of air leaks.
Comment
-
Originally posted by boston View PostSuggestions? I figure online I can be the store pricing of over 150 dollars... ha.
and God said, "Let there be air compressors!"
__________________________________________________ ______________________
2009 Suzuki DL650 V-Strom, 2004 HondaPotamus sigpic Git'cha O-ring Kits Here!
Comment
-
koolaid_kid
Comment
-
BassCliff
Greetings and Salutations!!
Hi Mr. boston,
Just in case you haven't seen a "mega-welcome", here is your very own.
I'm going to dump a TON of information on you and share some GS lovin'.
I just stopped by to welcome you to the forum in my own, special way.
If there's anything you'd like to know about the Suzuki GS model bikes, and most others actually, you've come to the right place. There's a lot of knowledge and experience here in the community. Come on in and let me say "HOoooowwwDY!"....
Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", "Top 15 Tips For GS Happiness", the Carb Cleanup Series, and the Stator Papers. All of these tasks must be addressed in order to have a safe, reliable machine. This is what NOT to do: Top 10 Newbie Mistakes. Now let me roll out the welcome mat for you...
Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!
Thanks for joining us. Keep us informed.
Thank you for your indulgence,
BassCliff
Comment
-
Welcome to the forums!
+1 on the above.
All I did for my '82 450E was a carb dip, the combo kit from www.cycleorings.com for all new O rings, intake O rings, and the stainless allen heads for the boots and a pair of float bowl gaskets for less than $6 each from Boulevard Suzuki and my carbs are now as good as new... except for re-jetting but that's a whole different can of worms...1982 GS450E - The Wee Beastie
1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020
sigpic
450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh
Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11
Comment
-
Originally posted by robertbarr View PostYes, I'd say there's a fair chance you can do a little better than $150.
http://www.cycleorings.com/450.html1981 gs650L
"We are all born ignorant, but you have to work hard to stay stupid" Ben Franklin
Comment
-
koolaid_kid
Originally posted by pete View PostWelcome to the forums!
+1 on the above.
All I did for my '82 450E was a carb dip, the combo kit from www.cycleorings.com for all new O rings, intake O rings, and the stainless allen heads for the boots and a pair of float bowl gaskets for less than $6 each from Boulevard Suzuki and my carbs are now as good as new... except for re-jetting but that's a whole different can of worms...
Comment
-
Originally posted by koolaid_kid View PostGee, that sounds familiar. Hehe. And the rejet is your fault, you know, for making mods.
And yes, re-jet is 100% my fault... and lovin' every minute of it! hahahahaha1982 GS450E - The Wee Beastie
1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020
sigpic
450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh
Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11
Comment
-
Originally posted by koolaid_kid View PostTrust me, I understand completely. My GPz750/810 is the most fun bike I have ever ridden on the street, bar none.1982 GS450E - The Wee Beastie
1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020
sigpic
450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh
Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11
Comment
-
Originally posted by koolaid_kid View PostYou have no idea. The Wiseco kit is just the tip of the iceberg. It's a hoot.1982 GS450E - The Wee Beastie
1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020
sigpic
450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh
Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11
Comment
Comment