Announcement

Collapse
No announcement yet.

81 GS 450 L carb kit/pricing?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    81 GS 450 L carb kit/pricing?

    After searching about online and not finding a single complete carb kit purchasing option for an 81 450 L, I went into a local shop to see if they knew of where to purchase one. Unfortunately it seems there's not as much demand for a full kit, but I'm still looking at trying to find the least expensive or at least "the most reasonable" price for a carb kit. Suggestions? I figure online I can be the store pricing of over 150 dollars... ha.

    #2
    You don't need a kit. You need a set of o-rings from cycleorings.com and new fuel bowl gaskets. And if your bike has o-rings on the carb instake boots, cycleorings carry those as well.
    And the rebuild instructions from BassCliff's site.

    Comment


      #3
      X2... no kit needed. Follow the Carb cleaning tutorial on the page linked in my sig. Get all your o rings from cycle orings (also linked on the page in my sig) do not take shortcuts, they will only make your task harder and cost more in the long run.

      While you are at it replace the orings between the intake boots and the head. These are a MAJOR source of air leaks.

      Comment


        #4
        Originally posted by boston View Post
        Suggestions? I figure online I can be the store pricing of over 150 dollars... ha.
        Yes, I'd say there's a fair chance you can do a little better than $150.

        and God said, "Let there be air compressors!"
        __________________________________________________ ______________________
        2009 Suzuki DL650 V-Strom, 2004 HondaPotamus sigpic Git'cha O-ring Kits Here!

        Comment


          #5
          boston, get the 450 combo kit. With that and a pair of fuel bowl gaskets you will be gtg.

          Comment


            #6
            Greetings and Salutations!!

            Hi Mr. boston,

            Just in case you haven't seen a "mega-welcome", here is your very own.

            I'm going to dump a TON of information on you and share some GS lovin'.

            I just stopped by to welcome you to the forum in my own, special way.

            If there's anything you'd like to know about the Suzuki GS model bikes, and most others actually, you've come to the right place. There's a lot of knowledge and experience here in the community. Come on in and let me say "HOoooowwwDY!"....

            Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", "Top 15 Tips For GS Happiness", the Carb Cleanup Series, and the Stator Papers. All of these tasks must be addressed in order to have a safe, reliable machine. This is what NOT to do: Top 10 Newbie Mistakes. Now let me roll out the welcome mat for you...



            Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!

            Thanks for joining us. Keep us informed.

            Thank you for your indulgence,

            BassCliff

            Comment


              #7
              Welcome to the forums!

              +1 on the above.

              All I did for my '82 450E was a carb dip, the combo kit from www.cycleorings.com for all new O rings, intake O rings, and the stainless allen heads for the boots and a pair of float bowl gaskets for less than $6 each from Boulevard Suzuki and my carbs are now as good as new... except for re-jetting but that's a whole different can of worms...
              1982 GS450E - The Wee Beastie
              1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020

              sigpic

              450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh

              Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11

              Comment


                #8
                Originally posted by robertbarr View Post
                Yes, I'd say there's a fair chance you can do a little better than $150.

                http://www.cycleorings.com/450.html
                Wow, it couldn't be any simpler- no searching required!
                1981 gs650L

                "We are all born ignorant, but you have to work hard to stay stupid" Ben Franklin

                Comment


                  #9
                  Originally posted by pete View Post
                  Welcome to the forums!

                  +1 on the above.

                  All I did for my '82 450E was a carb dip, the combo kit from www.cycleorings.com for all new O rings, intake O rings, and the stainless allen heads for the boots and a pair of float bowl gaskets for less than $6 each from Boulevard Suzuki and my carbs are now as good as new... except for re-jetting but that's a whole different can of worms...
                  Gee, that sounds familiar. Hehe. And the rejet is your fault, you know, for making mods.

                  Comment


                    #10
                    Originally posted by koolaid_kid View Post
                    Gee, that sounds familiar. Hehe. And the rejet is your fault, you know, for making mods.
                    Hahah indeed!

                    And yes, re-jet is 100% my fault... and lovin' every minute of it! hahahahaha
                    1982 GS450E - The Wee Beastie
                    1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020

                    sigpic

                    450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh

                    Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11

                    Comment


                      #11
                      Originally posted by pete View Post
                      Hahah indeed!

                      And yes, re-jet is 100% my fault... and lovin' every minute of it! hahahahaha
                      Trust me, I understand completely. My GPz750/810 is the most fun bike I have ever ridden on the street, bar none.

                      Comment


                        #12
                        Originally posted by koolaid_kid View Post
                        Trust me, I understand completely. My GPz750/810 is the most fun bike I have ever ridden on the street, bar none.
                        60 bonus cc's hey? That's gotta be fun!
                        1982 GS450E - The Wee Beastie
                        1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020

                        sigpic

                        450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh

                        Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11

                        Comment


                          #13
                          Originally posted by pete View Post
                          60 bonus cc's hey? That's gotta be fun!
                          You have no idea. The Wiseco kit is just the tip of the iceberg. It's a hoot.

                          Comment


                            #14
                            Originally posted by koolaid_kid View Post
                            You have no idea. The Wiseco kit is just the tip of the iceberg. It's a hoot.
                            Aaaah... I wanna know more... but possibly an off topic subject rather than in a 450L carb thread
                            1982 GS450E - The Wee Beastie
                            1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020

                            sigpic

                            450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh

                            Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11

                            Comment

                            Working...
                            X