Muffler Question

[Legionnaire]

I have been shopping around for a decent exhaust I really really want a reverse cone megaphone, but the only person who I found that makes a nice one in my size is CONE Engineering. My pipe is 2", so they make one in a 2" and 2.5", I feel like a 2" one wouldn't slip on it would just be the same size and not work, but wouldn't a 2.5" be way to big?

Also should I get a 2" clamp to go with it or a 2 1/8" clamp? This is probably extremely simple I am just over thinking it.

Here is the specs to the CONE mufflers: http://www.coneengineering.com/pdf/m...lers%20PDF.pdf

(It's the one right at the top)

I was also thinking about keeping this real cheap and going for this glass pack: http://www.jegs.com/i/Patriot-Exhaus...oductId=751308

But the same questions go for this one too, the whole if it's 2" and my pipe is 2" won't it not fit, thanks everyone ahead of time for answering my noob questions.

[1948man]

I think a muffler shop could flare one end to accomodate the other. Maybe you could call a shop and describe your situation and see if they can help you.