Announcement

Collapse
No announcement yet.

Just got my Dynojet kit......awwww crap.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Just got my Dynojet kit......awwww crap.

    I just got my kit from Z-1 only to discover the 36mm carbs I bought to run on my 80 gs1100 w/pipe & pods, already had Dynojet needles.
    The old needles are on the right in the pic. Those ridges you see are just marks on the needle not gouges.

    Looks like I might have to sell the kit which I haven't even opened.

    80 gs1100 16-v ported & polished, 1 mm oversize intake valves, 1150 carbs w/Dynojet stage 3, plus Bandit/gsxr upgrades

    #2
    Check the mains and such as well, if you have a dynojet kit in there, you can always return the NW kit to z1.

    Comment


      #3
      Yeah, I only bought the kit to get the needles. I already had 130 mains & 160 air jets. The pilot stays stock apparently. Also, the slide was already enlarged to the proper size too.
      80 gs1100 16-v ported & polished, 1 mm oversize intake valves, 1150 carbs w/Dynojet stage 3, plus Bandit/gsxr upgrades

      Comment

      Working...
      X