.png "Powered by vBulletin")
I just noticed my carbs dont have the two plastic washers or spring on the needles on the slides... is this OK?? I jave another bank of carbs I'm going to disassemble and see if they have them.
-
-
Well... now i look at it and my lever-choke vm carbs dont have a space for the spring in the base of the cylinder... so I think I'm ok... however the needles I have are different sizes too. they have a blunter tip and arent as tapered as the ones with the plastic spacers/slrings/and lever choke.
Looks like theyre just two different configurations. -
The needles that you are describing will richen the mixture in the 1/2 - WOT position. This my be desired, depending on what you are running for exhaust and air intake. It WILL make the bike a little more difficult to tune, however.
Comment
-
Go here and check the numbers if youve got the stock configuration for the exhaust....
MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
Comment