The babies are about to get dunked!

[bottobot]

dont forget to take something and poke the crud outta the bowl drains. i used a matchstick and a wire from a wire brush.

Thanks for tip, there was some buildup and I took care of it.

And lastly here are the carbs all back together!

[thewiz]

This may be a dumb question but did you identify the carb bodies before seperation and put them back in the same order? #3 carb From the left as you sit on the bike should be the non adjustable one if you got it together right. Just checking

[bottobot]

thats a good tip, all the carbs are adjustable if you mean air/fuel screws. However identifying which goes where is pretty easy if you look at how the fuel tubes slot together and what position the air screws are facing. Normally I would go through great pains to make sure I got the carbs back on right but with this set it seems straight forward if you use your thinking cap. Anything I might have missed?

[bottobot]

Actually I just noticed something, I put the float bowl covers on the wrong sides!