Announcement

Collapse
No announcement yet.

Bolts or Studs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Bolts or Studs

    So I know the pro's and con's of bolts and studs, but since I already have the set of bolts in hand, and I am trying to find the correct stud and nut, ( which by the way, what is the correct length of the stud ? 40mm ?)

    What should I do, use what I have, or get the studs ? Can I use what I have and if and when I find the studs, remove one bolt at a time, and put the stud in it's place, that way I am not removing the entire exhaust once again...

    This is what I currently have







    .

    #2

    Did mine with studs.As I will take it off more it seemed like a good idea.Skunk pipes are in using the SS Allen's I got with the engine kit.Being chrome I'm probably not going to be repainting it

    Comment


      #3
      I used studs that were about 50mm or so long I think.
      Cowboy Up or Quit. - Run Free Lou and Rest in Peace

      1981 GS550T - My First
      1981 GS550L - My Eldest Daughter's - Now Sold
      2007 GSF1250SA Bandit - My touring bike

      Sit tall in the saddle Hold your head up high
      Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
      and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"

      Comment

      Working...
      X