Non Vacuum Petcock

[Guest]

Hi Guys,

I am running CR29s on this racebike build (77GS750) and need a non - vacuum type petcock to run w/ these CR29s. Can I run this thing on PRI and achieve the same thing or do you think I'll need some after market petcock that is Gravity fed?

-joe

[mrbridgeport]

Pingle in Wisconsin

Pingle in Wisconson has a full line of stuff that will work gravity fed on the GS's

[Steve]

You could run the stock petcock on PRIme.

I am guessing you are asking this because the CR29s don't have a vacuum port?

If that is the case, you can put an adapter in your carb sync port in one of your intake boots and run a hose from there to the petcock.
That would give you the convenience and safety of an automatic petcock (unless that is prohibited by racing rules).

.

[7981GS]

You could run the stock petcock on PRIme.

I am guessing you are asking this because the CR29s don't have a vacuum port?

If that is the case, you can put an adapter in your carb sync port in one of your intake boots and run a hose from there to the petcock.
That would give you the convenience and safety of an automatic petcock (unless that is prohibited by racing rules).

Like so...




Eric

[mrbridgeport]

Gotcha. Thanks guys, I'd love to save the money and not have to buy a Pingle. I'll set it up and keep you posted!