.png "Powered by vBulletin")
I just got to tearing down my carbs and lo and behold I find a 0 ring missing off one of the mixture screws. This is the first time the carbs have been totally taking down so it must have be a mistake at the factory no? It has always idled a bit weird from the get go and most everyone waved it off as these are those new CV carbs things. Guess not huh. Weird thing though, you would have thought it would show up on the plug not burning right...never did, just idled a bit weird now and then.
-
sigpicMrBill Been a GSR member on and off since April 2002
1980 GS 750E Bought new in Feb of 1980
2015 CAN AM RTS
Stuff I've done to my bike:dancing: 1100E front end with new Sonic springs, 1100E swing arm conversion with new Progressive shocks installed, 530 sprockets/chain conversion, new SS brake lines, new brake pads. New SS fasteners through out. Rebuilt carbs, new EBC clutch springs and horn installed. New paint. Motor runs strong. -
Are you SURE there is no o-ring?
They don't just fall out, sometimes they have to be extracted. I use a pointy drywall screw for the job.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.) -
Just think how much better it will run when you replace it!sigpic
Steve
"The world is a book, and those who do not travel read only one page." :cool:
_________________
'79 GS1000EN
'82 GS1100EZComment
-
this is a huge newb question, but not dealing with orings a whole lot, do the orings in these carbs create that much of an issue if old or missing, would they creat a mpg issue as wellComment
Comment