Announcement

Collapse
No announcement yet.

1979 GS550E Carbs - missing vacuum hose?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    1979 GS550E Carbs - missing vacuum hose?

    I took the carbs off of my bike today and noticed that there seems to be a missing hose (maybe a vacuum hose?) between carbs 2 and 3 (blue circle in photo). Can anyone confirm that there is supposed to be a hose there and also why or why not?

    There was already a hose between carbs 3 and 4 and also between 1 and 2 when I pulled the carbs off of the bike. I went ahead and put a hose between carbs 2 and 3 just in case. I can easily cut it off if it isn't needed.


    #2
    The carb bodies are not drilled though on the center carbs, where you marked. That tube won't do any good.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      If you look at the edge of the red circles on carbs 2 and 4 (carbs are upside down, so #4 is on the left, #1 is on the right, in that picture), you will see the fittings where VENT hoses are supposed to be attached. The vent fitting on #4 is attached via a short hose to #3 (which you have installed) and, similarly, the fitting on #2 is connected to #1. There should be no vent hose between #2 and #3, just the fuel "T" that is shown just above your blue circle.

      Those vent hoses should be routed over the airbox and end up either behind the airbox or under the seat in a pocket of relatively still air. They are the atmospheric reference for the carbs, so need to have calm air at the ends.

      .
      sigpic
      mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
      hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
      #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
      #2 son: 1980 GS1000G
      Family Portrait
      Siblings and Spouses
      Mom's first ride
      Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
      (Click on my username in the upper-left corner for e-mail info.)

      Comment


        #4
        Originally posted by Steve View Post
        If you look at the edge of the red circles on carbs 2 and 4 (carbs are upside down, so #4 is on the left, #1 is on the right, in that picture), you will see the fittings where VENT hoses are supposed to be attached. The vent fitting on #4 is attached via a short hose to #3 (which you have installed) and, similarly, the fitting on #2 is connected to #1. There should be no vent hose between #2 and #3, just the fuel "T" that is shown just above your blue circle.

        Those vent hoses should be routed over the airbox and end up either behind the airbox or under the seat in a pocket of relatively still air. They are the atmospheric reference for the carbs, so need to have calm air at the ends.

        .
        Thanks for the quick, detailed response. I've still got a lot to learn about these things. You've definitely helped.

        Comment


          #5
          Ed beat me to it. He posted while I was busy typing details.

          .
          sigpic
          mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
          hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
          #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
          #2 son: 1980 GS1000G
          Family Portrait
          Siblings and Spouses
          Mom's first ride
          Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
          (Click on my username in the upper-left corner for e-mail info.)

          Comment

          Working...
          X