Announcement

Collapse
No announcement yet.

Carb OEM specs as per factory manuals

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Carb OEM specs as per factory manuals

    Heys guys this is working out real good, but do me a favor;

    I don't mind you guys linking pictures but am a little concerned when the link goes down say a year from now then the info is lost again, so please type in the info so we have if forever. You can just copy and paste one of the lists below and just fill it out with your info.

    I propose that we start a carb spec page maybe a link off the carb clean up page. we can follow this layout

    GS550L (77-79) the specs are for the VM's

    idle r/min 1100-1200
    carb mik vm22ss
    id no 47110
    bore size 22 (0.87)
    float height 24.+/-1.0 (0.95 +/-0.04)
    fuel level 4.0+/-1.0 (0.16 +/-0.04)
    air screw 2.0 turns back
    cut away 1.5
    jet needle 5dl35-3 (the -3 3rd notch??)
    pilot screw 1.0
    pilot jet #15
    pilot outlet 0.6
    needle jet 0-6
    by pass 1.0
    main jet #80


    GS550 (80-82) the specs are for the CV's

    idle r/min 1100-+/-100r/min
    carb mik bs32ss (4 seprate carbs)
    id no 47160 (us) 47170 (can)
    bore size 32 (1.26)
    float height 22.4.+/-1.0 (0.88 +/-0.04)
    fuel level 5.0+/-0.5 (0.20 +/-0.04)
    main jet #92.5
    main air jet 1.6
    jet needle (4bel2 us model) (5f42-3rd notch canadian adjusable needle)
    needle jet x-6
    pilot jet #40
    throttle valve #135
    by pass (0.9, 0.7, 0.7 us model) (1.0,0.8,0.8 canadian)
    pilot outlet 0.7
    valve seat 2.0
    starter jet #35
    pilot screw 3.5 turns back (mixture screw)
    pilot air jet (us model #150) (#120 canadian)

    these setting apply to all 550 models with the CV style carbs,
    Me personaly would try to get the carbs as close to the the canadian specs as possable the US models were lean out so much to meet emissions. the candian specs give the bike a hardier fuel supply.
    if we all work together we should get really close to specing out all the diffrent size bike carbs, i think i can also supply the gs1000 cv carbs specs i need to check. But we should at least come up with specs for the 1100's (...joe), and maybe some folks have the specs for the gs 750/700, and some for the 400/450 and the 850 (nick diaz??) the 1150 (earl??)

    -Ryan
    Last edited by first timer; 07-18-2007, 12:04 AM.
    78 GS1000 Yosh replica racer project
    82 Kat 1000 Project
    05 CRF450x
    10 990 ADV-R The big dirt bike

    P.S I don't check PM to often, email me if you need me.

    #2
    It's a great idea, and then we could make it a PDF or something to be downloaded by members.

    I like this idea.

    Comment


      #3
      i can pdf it if we get the info.
      or html the info

      ryan
      78 GS1000 Yosh replica racer project
      82 Kat 1000 Project
      05 CRF450x
      10 990 ADV-R The big dirt bike

      P.S I don't check PM to often, email me if you need me.

      Comment


        #4
        First Timer,

        It so happens that I've just completely cleaned and rebuilt the CV carbs on my 1981 GS550L. I only checked one air screw before I removed it (as the others were stuck and just getting them out was enough of a job) and it was 1 1/2 turns out. Is this information you present for the air screw for my carbs correct?

        I also need help in syncing the carbs and adjusting the air screws. Should I adjust the sync first or the air screws? I what order of carbs should I adjust the sync and the air screws? Do I adjust the air screw for the highest idle?

        Thanks for the help.
        Kelly

        Comment


          #5
          That's a good idea. Instead of PDF'ing it though I would store the info in the database here in a similar fashion of what we do with the Owner's Registry and Gallery date. That way we have a bit of control over the information being presented (in case it's bogus). Besides, I don't think many prople would be interested in seeing information for many bikes, just the bike that they own.

          This sounds like another project on the list doesn't it?

          --- Frank ---
          This is a test of signatures.

          There should be a word bolded in this line through the toolbar.

          There should be a word bolded in this line through <b>HTML</b>

          There should be a word bolded in this line through BBCode

          Comment


            #6
            i am just re awakeing this thread, lets all contribute to it.

            i can also post the specs for the gs1000 with vm's and for cv's. and the settings i have discovered for gs1000 and maybe a 750 running 29mm smoothies.


            -ryan
            78 GS1000 Yosh replica racer project
            82 Kat 1000 Project
            05 CRF450x
            10 990 ADV-R The big dirt bike

            P.S I don't check PM to often, email me if you need me.

            Comment


              #7
              Yeah, lets do it..

              However we will need a central repository for the information and set up a standard for input.

              Best bet for this would be to set up a form for submital through a web page.
              That way all the information will be in the same format, and a quick import can be done to import it into the database.

              If I was more of a web programmer, I could set it up. (I still may be able to given enough time)

              Let me know.


              Amos

              Comment


                #8
                *****************1983 and up GS750E************1985 GS700E
                Type******************BS32SS*********************S ame
                ID No.*****************31300******************06A00 (06A10 CA)
                Bore*******************32mm*********************Sa me
                Idle rpm************1150 +/- 50 rpm*****************Same
                Fuel level*********5.0 +/- .5mm or .20 +/- .02 in**********Same
                Float height*******22.4 +/- 1mm or .88 +/- .04 in**********Same
                Main jet****************#117.5******************#122.5
                Main air jet**********1.7mm (0.07 in)****************Same
                Jet needle**************5D-12*********************5C-28
                Needle jet**************Y-6************************Y-5
                Pilot jet************** #37.5*********************Same
                By pass*************0.8mm (.03 in)*******************Same
                Pilot Outlet***********0.7mm (.03 in)*********************Same
                Valve seat************2mm (.08 in)********************Same
                Starter jet**************#45**************************Same
                Pilot screw************Pre-set*************************Same

                Comment


                  #9
                  thanks billy,

                  earlfor, or joe nardy you guys got any specs on the 1100 or the 1150 to post?

                  how about some of you 850 and 450 guys out there?

                  -ryan
                  78 GS1000 Yosh replica racer project
                  82 Kat 1000 Project
                  05 CRF450x
                  10 990 ADV-R The big dirt bike

                  P.S I don't check PM to often, email me if you need me.

                  Comment


                    #10
                    anyone elese like to share

                    -ryan
                    78 GS1000 Yosh replica racer project
                    82 Kat 1000 Project
                    05 CRF450x
                    10 990 ADV-R The big dirt bike

                    P.S I don't check PM to often, email me if you need me.

                    Comment


                      #11
                      I had (lost it now) been working on a form that could be used for submitting the data. I have the information for my 650 and I think the 550 (somewhere) though First Timer already posted it I believe.

                      Amos

                      Comment


                        #12
                        yeah man post your 650 info please try to use the format i have used

                        thanks
                        -ryan
                        78 GS1000 Yosh replica racer project
                        82 Kat 1000 Project
                        05 CRF450x
                        10 990 ADV-R The big dirt bike

                        P.S I don't check PM to often, email me if you need me.

                        Comment


                          #13
                          Hello folks!

                          I took this from my SUZUKI GS 650 G SERVICE MANUAL
                          I hope this could help....


                          GS 650 GZ/GLZ (82)

                          idle r/min 1100-+/-100r/min
                          carb mik bs32ss (4 seprate carbs)
                          id no 34300
                          bore size 32 (1.26)
                          float height 22.4.+/-1.0 (0.88 +/-0.04)
                          fuel level 5.0+/-0.5 (0.20 +/-0.04)
                          main jet #110
                          main air jet 2.0
                          jet needle 5C45
                          needle jet Y-7
                          pilot jet #42.5
                          throttle valve #135
                          by pass 0.8, 0.7, 0.8
                          pilot outlet 0.7
                          valve seat 2.0
                          starter jet #45
                          pilot screw pre-set (1.5 turns back (mixture screw))
                          pilot air jet #160
                          throttle cable play 0.5-1.0 (0.02-0.04)
                          choke cable play 0.5-1.0 (0.02-0.04)

                          GS 650 GD (83)

                          idle r/min 1100-+/-100r/min
                          carb mik bs32ss (4 seprate carbs)
                          id no 34300
                          bore size 32 (1.26)
                          float height 22.4.+/-1.0 (0.88 +/-0.04)
                          fuel level 5.0+/-0.5 (0.20 +/-0.04)
                          main jet #110
                          main air jet 2.0
                          jet needle 5C45
                          needle jet Y-7
                          pilot jet #42.5
                          throttle valve #135
                          by pass 0.8, 0.7, 0.8
                          pilot outlet 0.7
                          valve seat 2.0
                          starter jet #45
                          pilot screw pre-set (1.5 turns back (mixture screw))
                          pilot air jet #160
                          throttle cable play 0.5-1.0 (0.02-0.04)
                          choke cable play 0.5-1.0 (0.02-0.04)


                          GS 650 GLD (83)

                          idle r/min 1100-+/-100r/min
                          carb mik bs32ss (4 seprate carbs)
                          id no 34390
                          bore size 32 (1.26)
                          float height 22.4.+/-1.0 (0.88 +/-0.04)
                          fuel level 5.0+/-0.5 (0.20 +/-0.04)
                          main jet #107.5
                          main air jet 1.2
                          jet needle 5D59-3rd
                          needle jet X-2
                          pilot jet #47.5
                          throttle valve #135
                          by pass 0.8, 0.8, 0.8
                          pilot outlet 1.0
                          valve seat 2.0
                          starter jet #32.5
                          pilot screw pre-set (2.5 turns back (mixture screw))
                          pilot air jet #160
                          throttle cable play 0.5-1.0 (0.02-0.04)
                          choke cable play 0.5-1.0 (0.02-0.04)


                          GS 650 MD (KATANA)(83)

                          idle r/min 1100-+/-100r/min
                          carb mik bs32ss (4 seprate carbs)
                          id no 34390
                          bore size 32 (1.26)
                          float height 22.4.+/-1.0 (0.88 +/-0.04)
                          fuel level 5.0+/-0.5 (0.20 +/-0.04)
                          main jet #110
                          main air jet 2.0
                          jet needle 5C45
                          needle jet Y-7
                          pilot jet #92.5
                          throttle valve #135
                          by pass 0.8, 0.7, 0.8
                          pilot outlet 0.7
                          valve seat 2.0
                          starter jet #45
                          pilot screw pre-set (1.5 turns back (mixture screw))
                          pilot air jet #160
                          throttle cable play 0.5-1.0 (0.02-0.04)
                          choke cable play 0.5-1.0 (0.02-0.04)

                          Comment


                            #14
                            Originally posted by first timer
                            earlfor, or joe nardy you guys got any specs on the 1100 or the 1150 to post?

                            -ryan
                            Yeah, I have the factory manual for the GS1100 series. I'll post the specs in the next day or two................

                            Joe
                            IBA# 24077
                            '15 BMW R1200GS Adventure
                            '07 Triumph Tiger 1050 ABS
                            '08 Yamaha WR250R

                            "Krusty's inner circle is a completely unorganized group of grumpy individuals uninterested in niceties like factual information. Our main purpose, in an unorganized fashion, is to do little more than engage in anecdotal stories and idle chit-chat while providing little or no actual useful information. And, of course, ride a lot and have tons of fun.....in a Krusty manner."

                            Comment


                              #15
                              '83 GS1100ED(Canadian model for sure)

                              Carb Type Mikuni BS34SS
                              Bore Size 34mm
                              I.D. No 49360
                              Idle r/min 1050+100r/min
                              Fuel Level 5+.5mm
                              Float Height 22.4+1mm
                              Main jet #112.5
                              Main air jet 1.2mm
                              Jet Needle 5D9-3rd position
                              Needle jet X2
                              Pilot Jet #47.5
                              By pass .8mm
                              Pilot Outlet 1mm
                              Valve Seat 2mm
                              Starter jet #32.5
                              Pilot Screw 2 1/2
                              Pilot air screw #160
                              Throttle cable play .5-1mm
                              Kevin
                              E-Bay: gsmcyclenut
                              "Communism doesn't work because people like to own stuff." Frank Zappa

                              1978 GS750(x2 "projects"), 1983 GS1100ED (slowly becoming a parts bike), 1982 GS1100EZ,
                              Now joined the 21st century, 2013 Yamaha XTZ1200 Super Tenere.

                              Comment

                              Working...
                              X