Compare this pic to my other pic & you will see the plug I'm talking about.
Announcement
Collapse
No announcement yet.
rubber plug or not?
Collapse
X
-
Sorry, but you're wrong. Here's the same pic of a "normal carb that has the plug. Check yours & you will find it looks like this & has a hole running thru the carb body under the pilot jet. This one does not.
Compare this pic to my other pic & you will see the plug I'm talking about.80 gs1100 16-v ported & polished, 1 mm oversize intake valves, 1150 carbs w/Dynojet stage 3, plus Bandit/gsxr upgrades
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35597
- Torrance, CA
Originally posted by nastyjones View PostSorry, but you're wrong. Here's the same pic of a "normal carb that has the plug. Check yours & you will find it looks like this & has a hole running thru the carb body under the pilot jet. This one does not.
Compare this pic to my other pic & you will see the plug I'm talking about.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
If it has that drilled passage then it has no hole into the carb body from the pilot jet & therefore (I believe) no rubber plug. And it's all 4 carbs that are this way, not just one.80 gs1100 16-v ported & polished, 1 mm oversize intake valves, 1150 carbs w/Dynojet stage 3, plus Bandit/gsxr upgrades
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35597
- Torrance, CA
As already stated by both Steve and me, the passage which transfers fuel from the main to the pilot is roughly shown in the photo. The drilled/plugged passage that you reference is downstream of the pilot jet.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
Comment