Announcement

Collapse
No announcement yet.

rubber plug or not?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Sorry, but you're wrong. Here's the same pic of a "normal carb that has the plug. Check yours & you will find it looks like this & has a hole running thru the carb body under the pilot jet. This one does not.



    Compare this pic to my other pic & you will see the plug I'm talking about.
    80 gs1100 16-v ported & polished, 1 mm oversize intake valves, 1150 carbs w/Dynojet stage 3, plus Bandit/gsxr upgrades

    Comment


      #17
      Originally posted by nastyjones View Post
      Sorry, but you're wrong. Here's the same pic of a "normal carb that has the plug. Check yours & you will find it looks like this & has a hole running thru the carb body under the pilot jet. This one does not.

      Compare this pic to my other pic & you will see the plug I'm talking about.
      I don't know why one carb has a drilled passage at the base of the tower and the other doesn't. But what does that have to do with the topic at hand?
      Ed

      To measure is to know.

      Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

      Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

      Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

      KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

      Comment


        #18
        If it has that drilled passage then it has no hole into the carb body from the pilot jet & therefore (I believe) no rubber plug. And it's all 4 carbs that are this way, not just one.
        80 gs1100 16-v ported & polished, 1 mm oversize intake valves, 1150 carbs w/Dynojet stage 3, plus Bandit/gsxr upgrades

        Comment


          #19
          As already stated by both Steve and me, the passage which transfers fuel from the main to the pilot is roughly shown in the photo. The drilled/plugged passage that you reference is downstream of the pilot jet.
          Ed

          To measure is to know.

          Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

          Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

          Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

          KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

          Comment

          Working...
          X