Announcement
Collapse
No announcement yet.
1979 GS850 idle question
Collapse
X
-
Joeylambo
1979 GS850 idle question
Just getting the bike up and running. All is good, except the bike idles at around 5k when in neutral. Adjusting the idle knob has no effect. Any insights on what the problem and solution might be would be most appreciated!!Tags: None
-
kdo58
throttle cable is adjusted to tight? should have some slack.
-
Joeylambo
The idle will drop to around 1.5 when it's put into 1st. Would a tight throttle still be the problem?
Comment
-
What was it doing before you worked on it? did you work on the carbs or valve shims? if so did you vacuum sych the carbs? could be a choke cable stuck? or choke shaft sticking. Basically just check to make sure all your cables have good play and nothing is binding on the carbs.Rob
1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533
Comment
-
Joeylambo
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35645
- Torrance, CA
Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
ha,ha,ha.....that's funny.Rob
1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35645
- Torrance, CA
$28.86 each here...http://www.boulevardsuzuki.com/fiche_section_detail.aspEd
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
slyone
wow Ed they are considerably cheaper! Are they indeed 1st class oem Suziki parts? I bookmarked the page
Comment
Comment