gsxr throttle body

[Guest]

here is a gsxr 1000 throttle body that im looking at getting
can anyone tell me how to make this kind of system work on my bike?
what electronics should i use
what can and cant i use to make it work

http://www.ebay.com/itm/03-04-Suzuki-GSXR-1000-Oem-Throttle-Bodies-/180963467979?pt=Motorcycles_Parts_Accessories&hash=item2a224362cb&vxp=mtr

[Dogma]

Are they even sized correctly for your bike? I know it's the same displacement, but the gixxer spins faster doesn't it?

Myself, I'd want to have the plan in place before I bought anything. A few EFI conversions have been done around here. None of them were anything like trivial projects. A lot more work than making carbs work, and not a lot of benefit (but more than none).

[gearhead13]

Your '78 bike has like 26mm carbs? Those are probably 42mm or bigger throttle bodies, you wouldnt be able to make them fit the intake boots. A gsxr 600 has about 38mm.
You would need a mega or microsquirt system and all the sensors to make it work.

[Mista M]

Do a lot of google searching. It can be done with micro squirt as mentioned. Takes a great deal of researching and putting the right parts together. Get similar sized throttle bodies, sensors, computer to control it, and figure out your fuel pump set up. Thats pretty much it. Besides having the ability to do tuning, which is a learning curve in itself. There is not a plug n play kit, you will be doing a lot of trial and error.