gs 1100 carbs on gs1000

[Guest]

my buddies 81 gs1000 has 82gs1100 carbs on it

are these a bolt and go? my buddies bike has a 4-1 header with open exhaust...are these carbs big enough to not jet up? or are the 1000-1100 carbs the same...

it hesitates bad untill WOT and even does it a little up there... no smoke and it pops...im almost 100% sure it needs a valve adjust too

and what happens if i put a set of gs1000 carbs on my 81 gs850...would i need to re-jet for my 4-1 and pods(if i put them on it) or is it to much hassle

Edit: also do the 1000's,1100's and 850's have the same valve shim size

[Big T]

my buddies 81 gs1000 has 82gs1100 carbs on it

are these a bolt and go?

Probably, if they fit in the boots you're good to go

my buddies bike has a 4-1 header with open exhaust...are these carbs big enough to not jet up?

No

or are the 1000-1100 carbs the same...

Depends on the year

it hesitates bad untill WOT and even does it a little up there... no smoke and it pops...im almost 100% sure it needs a valve adjust too

and what happens if i put a set of gs1000 carbs on my 81 gs850...would i need to re-jet for my 4-1 and pods(if i put them on it) or is it to much hassle

Yes

Edit: also do the 1000's,1100's and 850's have the same valve shim size

Yes, all Suzukis have the 29.5 mm shim

So many questions, so badly researched

Spend some time here, it's at the top of this forum

http://www.thegsresources.com/_forum/showthread.php?t=73723