.png "Powered by vBulletin")
Hello, i'm wondering if a 4-1 exhaust designed for a 750 will be a direct fit for a 650? A seller on Ebay is selling a 4-1 for "650/750" which got me wondering if the port spacing / diameter is identical? But if that was true then wouldn't the dimensions be the same as all of the lager bikes, 850+? I would prefer not to get a chrome pipe if i can avoid it, and there are some new black ones available for the 750 but not the 650. Dose anyone have any experience with this?
-
Last edited by Guest; 03-18-2013, 08:55 PM. -
Did you search your question? I have not had much luck in this quest. From what I understand, they are not compatable. -
The 750 exhaust won't fit on a 650 - very different proportions.79 GS1000S
79 GS1000S (another one)
80 GSX750
80 GS550
80 CB650 cafe racer
75 PC50 - the one with OHV and pedals...
75 TS100 - being ridden (suicidally) by my fatherComment
-
He's rightOriginally posted by hampshirehog View Post
No1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
yes as I have discovered they are not compatible, I ended up buying a new 650 4-1 then cutting and welding so I could fit a "mid-pipe" that allows me to fit two silencers stacked similar to a ducati, ill post a photo when i get a chance to take one.
thanks for your helpComment
Comment