Announcement

Collapse
No announcement yet.

81 GS750L Only will run on starting fluid, but quickly dies afterwards. HELP!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Hi,

    Originally posted by NatiKiD View Post
    I shouldn't be concerned about this so called JB welded post?
    When you take the carbs apart for cleaning, have a look and evaluate. I've seen some broken float posts repaired very well.


    Thank you for your indulgence,

    BassCliff

    Comment


      #17
      Ok. I'll give it a shot to have it rebuilt and cleaned.

      Comment


        #18
        Originally posted by NatiKiD View Post
        I don't think I have the patience to do that. Hmmmm
        Learn some patience, you need some working on these bikes at times. We have all had our moments with the GS. If ya ride it, gotta know how to fix it.
        sigpicMrBill Been a GSR member on and off since April 2002
        1980 GS 750E Bought new in Feb of 1980
        2015 CAN AM RTS


        Stuff I've done to my bike:dancing: 1100E front end with new Sonic springs, 1100E swing arm conversion with new Progressive shocks installed, 530 sprockets/chain conversion, new SS brake lines, new brake pads. New SS fasteners through out. Rebuilt carbs, new EBC clutch springs and horn installed. New paint. Motor runs strong.

        Comment


          #19
          Originally posted by mrbill5491 View Post
          Learn some patience, you need some working on these bikes at times. We have all had our moments with the GS. If ya ride it, gotta know how to fix it.
          Thanks to a nice gentleman on here named Steve. I'm learning carb cleaning 101 tomorrow.

          Comment


            #20
            Originally posted by NatiKiD View Post
            Thanks to a nice gentleman on here named Steve, ...
            . . . . . . . . . . . . . . .

            .
            sigpic
            mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
            hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
            #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
            #2 son: 1980 GS1000G
            Family Portrait
            Siblings and Spouses
            Mom's first ride
            Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
            (Click on my username in the upper-left corner for e-mail info.)

            Comment


              #21
              Originally posted by Steve View Post
              . . . . . . . . . . . . . . .

              .
              Dang Steve you must be losing it lol.
              sigpicMrBill Been a GSR member on and off since April 2002
              1980 GS 750E Bought new in Feb of 1980
              2015 CAN AM RTS


              Stuff I've done to my bike:dancing: 1100E front end with new Sonic springs, 1100E swing arm conversion with new Progressive shocks installed, 530 sprockets/chain conversion, new SS brake lines, new brake pads. New SS fasteners through out. Rebuilt carbs, new EBC clutch springs and horn installed. New paint. Motor runs strong.

              Comment


                #22
                Originally posted by mrbill5491 View Post
                Dang Steve you must be losing it lol.
                We have only talked on the phone, he has not met me in-person, yet.

                That will change this evening.

                .
                sigpic
                mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
                hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
                #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
                #2 son: 1980 GS1000G
                Family Portrait
                Siblings and Spouses
                Mom's first ride
                Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
                (Click on my username in the upper-left corner for e-mail info.)

                Comment


                  #23
                  Another GSR member is drawn to the flame like a moth...

                  Hope you learned alot tonight as he's a pretty good instructor.
                  Cowboy Up or Quit. - Run Free Lou and Rest in Peace

                  1981 GS550T - My First
                  1981 GS550L - My Eldest Daughter's - Now Sold
                  2007 GSF1250SA Bandit - My touring bike

                  Sit tall in the saddle Hold your head up high
                  Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
                  and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"

                  Comment


                    #24
                    I had mentioned last night that we would soon have his carbs "in a hundred pieces".

                    Tonight, he believes me.

                    .
                    sigpic
                    mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
                    hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
                    #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
                    #2 son: 1980 GS1000G
                    Family Portrait
                    Siblings and Spouses
                    Mom's first ride
                    Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
                    (Click on my username in the upper-left corner for e-mail info.)

                    Comment


                      #25
                      Originally posted by Steve View Post
                      I had mentioned last night that we would soon have his carbs "in a hundred pieces".

                      Tonight, he believes me.

                      .
                      You were not kidding!!! :-) I learned alot tonight. Thank you! Cant wait to get the bike on the road.

                      Comment

                      Working...
                      X