Announcement

Collapse
No announcement yet.

I forgot Overflow Tubes

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    I forgot Overflow Tubes

    Bs32 carbs. Cleaned and installed. It was a battle to get them back in, and now i see i forgot the 2 overflow tubes. I dont want to take out the carbs again.
    Will it be ok without? The bike is not in show condition or anything close, so im not concerned with gas staining the engine.

    #2
    you should easily be able to refit the overflow tubes back on the carbs with them fitted to the engine
    1978 GS1085.

    Just remember, an opinion without 3.14 is just an onion!

    Comment


      #3
      Side note: the bike started instantly in first go. I am so happy my carb cleaning efforts payed off ��

      Comment


        #4
        you can get them on, but it's not very easy....but doable

        long screwdrivers, needle nose pliers, and a bit of luck and some fiddle farting around

        .

        Comment


          #5
          Ok, i will get right to it

          Comment


            #6
            Mission accomplished. Thanks for you encouragement.

            Comment


              #7
              way to go.....

              Comment


                #8
                Vent lines? I would of just left them off.
                1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
                1985 GS1150ES stock with 85 Red E bodywork.

                Comment

                Working...
                X