Will it be ok without? The bike is not in show condition or anything close, so im not concerned with gas staining the engine.
Announcement
Collapse
No announcement yet.
I forgot Overflow Tubes
Collapse
X
-
I forgot Overflow Tubes
Bs32 carbs. Cleaned and installed. It was a battle to get them back in, and now i see i forgot the 2 overflow tubes. I dont want to take out the carbs again.
Will it be ok without? The bike is not in show condition or anything close, so im not concerned with gas staining the engine.Tags: None
-
Walle
Side note: the bike started instantly in first go. I am so happy my carb cleaning efforts payed off
Comment
-
GateKeeper
you can get them on, but it's not very easy....but doable
long screwdrivers, needle nose pliers, and a bit of luck and some fiddle farting around
.
Comment
-
Walle
-
Walle
-
GateKeeper
-
Vent lines? I would of just left them off.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
Comment