Cracked diaphragms...now what?

[GateKeeper]

as per above

4th item down ?

http://www.siriusconinc.com/search_result.php?make=3&model=gs1100&part=1&partno=&x=31&y=15&search=search

.

[AJ]

Haven't bought from these guys personally, but a buddy of mine had good experience.

http://www.motorcyclecarbs.com/Suzuki_CV_Diaphragms_C833.cfm

[Steve]

bikebandit wants $106 a piece THAT IS INSANE!

Yes, it is insane, and I keep telling ya to lose that link to Bike BANDIT.

Yeah, they're not cheap, Boulevard Suzuki wants $99.42 each for them.

http://www.boulevardsuzuki.com/fiche_section_detail.asp?section=95961&category=Motorcycles&make=SUZUKI&year=1982&fveh=2156

And they are $97.83 at G&S Suzuki.

I have a box full of then from a 1980 GS 550. If they will work you can haave one free.

Your 550 uses BS32 carbs, his 1100 uses BS34. They slides are not the same.

UGH here goes a damn $400 hit

Hopefully you have not placed the order yet, as the links we have given you will save about $30.

.

[mike_of_bbg]

I saved this link in case it might come in handy some day. Check it out but please do your due diligence:

http://jbmindustries.com/Yamaha650.html

Yamaha SX, TX650, TX750, Venture, & Kawasaki KZ-750, XS500 Carburetor Diaphragms
for Mikuni BS38, BS36, BS34, & BS34SS CV constant velocity carburetors. This easy to
install part can cure engine stuttering, unwanted acceleration, uneven and
unbalanced carburetors caused by leaking or worn diaphragms. Until now
replacement meant you had to buy an expensive new throttle slide.
Please state carburetors you have or measure diameter of groove when ordering:

Only $19.50 each

Domestic Shipping only $6.80 per
order for any number of diaphragms
by FIRST CLASS Mail

Doesn't state Suzukis but take some measurements and see what they say.

EDIT: I see these have been mentioned a couple of times but no statement like "those won't work" or "I called and they won't fit"

[chef1366]

I have four good 32mm diaphragms.

[BIG_brother]

[QUOTE=Steve;1864214]Yes, it is insane, and I keep telling ya to lose that link to Bike BANDIT.=QUOTE]


Yeah well I w never order from those D bags at gssuzuki again took a month to get a part and they were A holes!

[BIG_brother]

as per above

4th item down ?

http://www.siriusconinc.com/search_result.php?make=3&model=gs1100&part=1&partno=&x=31&y=15&search=search

.

damn! thats much better

[BIG_brother]

damn! thats much better

ORDERED! 2-6 days and I will be riding. Brand new OEM diaphragms

[MykeB]

Hey chef I need a diaphram if you still got some, for my '81 GS650G.

[chef1366]

Hey chef I need a diaphram if you still got some, for my '81 GS650G.

I'll look tomorrow. I know I have two for sure.

[quexpress]

I saved this link in case it might come in handy some day. Check it out but please do your due diligence:

http://jbmindustries.com/Yamaha650.html

Doesn't state Suzukis but take some measurements and see what they say.

EDIT: I see these have been mentioned a couple of times but no statement like "those won't work" or "I called and they won't fit"

I have used their diaphragms for my Madura GV1200 carburetors with excellent results!

[FoxyBLankworthy]

http://www.partsnmore.com/ Carries diaphragms for certain kinds of GSs.