Suzuki GS1000 Fuel mixture screws

[OldVet66]

Keep in mind that all of your fuel mixture seats have been ruined. They are a good bit larger than design. I would start them out at 1/4 turn to begin with from lightly seated. All your fuel needle adjustments are going to be in further than carburetors with good needle seats because of the expanded holes. They will still work, but may never be just right. On a good set of carburetors the tips of the needles lightly seated is just visible below the hole in the throat of the carburetor. I imagine with new needles, lightly seated, they will stick up in the throat of the carburetor. Depending on how much will give you an idea of how much closer to seated you need to be to emulate a normal set when you go to adjust them.