.png "Powered by vBulletin")
Hi Guys i've fitted an early set of slide carbs (history unknown) to my GS850. It's a cafe racer so i've removed the air box and fitted bellends. ReJetted and fired it up. It runs badly needs lots of choke - now running on four but tickover is erratic sometimes hitting 4k rpm and then slowly coming down only for the revs to cut out.
What i'd like to do is set up the carbs - so i brought a morgan carbtune. I've been on you tube and there's quite a few videos on how to set the carb tune device up but not many on how to set the carbs up! What there is shows the device prior to tune and then after!!
I understand how to set the device up and also where it fits on the inlets. However, what i want to know is what i'm adjusting? Any help would be appreciated and a step by step guide for the GS850 slide carbs ideal.
Kind Regards
QM
What i'd like to do is set up the carbs - so i brought a morgan carbtune. I've been on you tube and there's quite a few videos on how to set the carb tune device up but not many on how to set the carbs up! What there is shows the device prior to tune and then after!!
I understand how to set the device up and also where it fits on the inlets. However, what i want to know is what i'm adjusting? Any help would be appreciated and a step by step guide for the GS850 slide carbs ideal.
Kind Regards
QM
Comment