Announcement

Collapse
No announcement yet.

Help!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    I've had good experience with http://www.jetsrus.com/

    Comment


      #32
      any thoughts

      any ideas as to the 6500 rpm stutter i really think i just need to move the eclip down one notch? just wanted the experts to chime in before i do that

      Comment


        #33
        Bump for exposure

        Comment


          #34
          Interesting read...thanks OP.


          Ed
          GS750TZ V&H/4-1, Progressive Shocks, Rebuilt MC/braided line, Tarozzi Stabilizer[Seq#2312]
          GS750TZ Parts Bike [Seq#6036]
          GSX-R750Y (Sold)

          my opinion shouldn't be taken as gospel or in any way that would lead you to believe otherwise (30Sep2021)

          Comment


            #35
            Replaced pilot jets with new stock #35 replaced all o-rings in carbs vacuum tuned them set mixture screws to two turns out also replaced all o-rings between the carb boots and the head set the float height to the manual spec of 20.5mm bike starts perfect and runs great BUT it breaks up around 6500 rpm about 2/3 to 3/4 throttle opening but if you get past it then the high jets kick in and it runs fine again so it my guess that i have to move the needles up a hair to get a little more fuel? any suggestions

            Comment

            Working...
            X