Announcement

Collapse
No announcement yet.

1978 gs1000 - Mikuni VM26ss

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    One other thing...bench sync them before you put them on the bike and when you set up the big idle knob in the center of the rack, watch the end of the rod. When the end comes into contact with then throttle liinkage, go in 2 full turns.

    NOTE.....his is a basic default spot and the bike will most likely be idling up around 1500 or so..no biggy. Just turn the knob out to lower the RPMs back down.
    MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
    1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

    NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


    I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

    Comment

    Working...
    X