K&L Parts conversion?

[Snyder450L]

I am working on jetting my 1982 GS450L. I have torn them apart and would like to get a 130 Main Jet and a larger Pilot jet. The bike currently has a 4C2 Needle Jet and a 115 Main Jet. I forgot to look at the pilot size but that should be stock as well. I was looking for a company who would sell me a smaller needle (Do not want to mess with shims). I am looking to go 2 sizes smaller as the Needle Jet has a (washer or shim) in it already. I believe this is a washer as the OEM diagram shows it as a washer and not a stock shim.

Does anyone have any input on where to buy jets? I am looking to purchase a couple different sizes so I can fine tune it.

Thanks everyone oh and PS I am running pods and only headers on the bike.

[limeex2]

Try sudco/mikuni. They may have charts so you can get the correct/leaner needle jet part number. Then try sourcing through K&L. Doubt K&L will have leaner sizes as they would be supplying stock jetting sizes.

[jrwilliams]

I use http://www.z1enterprises.com

Good prices and shipping isn't Horrendous!

I know im a little late on this post but i was looking through and if you haven't already purchased(or even if you have) these guys are great and i always get my shipments in NE Oklahoma within 8 days. Depending on the business loop. If i purchase on or between Friday - Sunday then it has taken 1 or 2 more days longer but still good enough for me.

But of course, im too cheap to expedite shipping!