Motion Pro carb adjustment tool MP08-0022

[Andrew Vanis]

Motion Pro carb adjustment tool MP08-0022

(tried the search but got an error)

Before I buy one .... How well does this tool work?

I am concerned about the alignment when used on the 2/3 location (pic attached) considering the choke and throttle cables and cable brackets.

[BassCliff]

Hi,

If you get an error it usually means that too many results have been returned. Refine/adjust your search parameters. There's a "how to" guide on my website.

Get the Morgan Carbtune. It's the right stuff.

EDIT: Oops, sorry. I read your question too fast. The Carbtool needs a little room. I have to loosen up the choke assembly on my carbs for it to fit properly. It's a little fiddly, but it works well. There's a "how to" carb sync guide on my website using the Carbtune and the Carbtool.



Thank you for your indulgence,

BassCliff

[robertbarr]

By coincidence, Steve (one of our budding entrepreneurs) is busy devising a scheme to make your carbs as easily adjustable as a Bandit's (for example) with spring-loaded screws that you simply turn with a screwdriver.

Not sure he'll be done in time for your project, though.

I used to do mine by trial and error -- just estimate how much the locknut is going to turn the adjustment screw when I snug it down with a deep walled socket. It takes patience that way, no doubt about it.