.png "Powered by vBulletin")
What size stainless Hex head screws do I need to order for the carb top & float bowl on a 1979 GS 1000?
-
80 gs1100 16-v ported & polished, 1 mm oversize intake valves, 1150 carbs w/Dynojet stage 3, plus Bandit/gsxr upgrades -
Looking at the parts fiche, I see that the float bowl screws have a part number of 02112-04168.
Looking right after the hyphen, I see that they are M4 x 16.
The top screws are also part number 02112-04168.
Most of the time, the bolt size is encoded in the part number.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.) -
unfortunately, the fiche is wrong
the bowl screws are 16mm long
the top screws are 12 mm long
Order them from this guy
I did and I'm very happy with his parts and service1978 GS 1000 (since new)
1979 GS 1000 (The Fridge, superbike replica project)
1978 GS 1000 (parts)
1981 GS 850 (anyone want a project?)
1981 GPZ 550 (backroad screamer)
1970 450 Mk IIID (THUMP!)
2007 DRz 400S
1999 ATK 490ES
1994 DR 350SESComment
-
I wish he had those sets at that price for the CV carbs, too.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
SteveOriginally posted by Steve View PostI wish he had those sets at that price for the CV carbs, too.
.
I bet you can contact him and he'll make you one
Polarroler1@aol.com1978 GS 1000 (since new)
1979 GS 1000 (The Fridge, superbike replica project)
1978 GS 1000 (parts)
1981 GS 850 (anyone want a project?)
1981 GPZ 550 (backroad screamer)
1970 450 Mk IIID (THUMP!)
2007 DRz 400S
1999 ATK 490ES
1994 DR 350SESComment
-
Here's the problem with that Ebay seller. The same problem with a lot of them that ship to Canada. He wants $20.00 shipping!!! I'll bet the real cost is around $5.00
No way, man.80 gs1100 16-v ported & polished, 1 mm oversize intake valves, 1150 carbs w/Dynojet stage 3, plus Bandit/gsxr upgradesComment
-
I really liked the ones I got from him also. Contact him and see if he can do better on the shipping.David
1998 Suzuki Bandit
1978 GS750 gone but not forgotten
1978 GS1000 - gone
1981 GS850 - goneComment
-
And the last number..or numbers in some case is the thread pitch. 16 mm will work on the tops..just hang down a bit thats all.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
Yeah, but the 12s are correctOriginally posted by chuck hahn View Post
When I ordered 2 of his sets and saw how long the top screws are, I fugured out what went wrong and emailed him. He sent me 24 -12 mm screws free - so i posted up my recommendation in the Buyers forum
My guess is that Steve has him setting up CV kits as we type1978 GS 1000 (since new)
1979 GS 1000 (The Fridge, superbike replica project)
1978 GS 1000 (parts)
1981 GS 850 (anyone want a project?)
1981 GPZ 550 (backroad screamer)
1970 450 Mk IIID (THUMP!)
2007 DRz 400S
1999 ATK 490ES
1994 DR 350SESComment
-
I just go to Fastenal and get the job boxes of the sizes I need. Can do 3 or 4 sets with the ( I think its ) 50 per box. Can get anything you want there,,,even colored screws, stainless...whatever. No dicking around and its done with what you know is what you need.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
Comment